Processor-controlled system amplifier PPA-120/180

Processor-controlled system amplifier, 120 W/100V, with 6 programmable inputs and built in FM-tuner
The inputs can be activated with the front keys or via external contacts. The processor technology permits individual configuration of each input via the front keys. These can be for example be mixed or switched with different priorities; gong signal prior to call, control override. The input sensitivity can be set to either line or microphone level. 3 loudspeaker circuits are adjustable. Spare 2 RPU can be retrofitted with gong SM-13E, equalizer EQ-15-VQ, paging stand module IM-20, balanced transformer and emergency power interface, can be converted to 19"

Technical details :
Output power sine (IEC 268 / 19.4 / 24h) 120W
Output power music 180W
Output voltage 100V / 70V / 50V / 35V / 25V internal adjustable
Loudspeaker impedance at 100V min. 84 Ohm
Distortion factor at 1KHz & 80% load < 0,1%
Frequency response 100V / 70V / 50V     -3dB 50Hz .. 20 KHz
Input sensitivity of final stage 600mV
Signal-to-noise-ratio > 95dB
Power consumption at 230V AC 250VA
Safety protected against short-circuit, no-load running and overheating
Ventilation natural convection
Size (WxHxD) 446mm x 133mm x 270mm
Weight appr. 10,5Kg

Pre-stages : All inputs for microphone or high-level sources
Microphone input sensitivity 0,7mV .. 10mV adjustable
Linear input sensitivity 150mV .. 10V adjustable
Gong / alarm input sensitivity 300mV
Tuner receiving range 87.5MHz .. 108MHz
Tuner presets up to 99
Tuner sensitivity 2uV typical
Cross-talk at 1KHz < -65dB
Priority control programmable
Options :
Transformer balanced inputs 1 : 1
Inputs for external preamplifier PA-4-C PA-4-C
Inputs for electret microphones electret
19" adapter US 016
48V DC emergency power supply NSS - 48
Remote control "Remote"
Remote control for tiner SM-2-ENR
Extension modules SM-5-A / SM-13-E / DVR-400 / CM-14-E / CM-15-E