Processor-controlled system
amplifier PPA-120/180
Processor-controlled system amplifier, 120 W/100V, with
6 programmable inputs. The inputs can be activated with the front keys or via external
contacts. The processor technology permits individual configuration of each input via the
front keys. These can for example be mixed or switched with different priorities; gong
signal prior to call, override control. The input sensitivity can be set to either line or
microphone level. 3 loudspeaker circuits are adjustable. Spare 2 RPU can be retrofitted
with gong SM-13E, equalizer EQ-15-VQ, paging stand module IM-20, balanced transformer and
emergency power interface, can be converted to 19"
Technical
details : |
Output power sine (IEC 268 / 19.4 / 24h) |
120W |
Output power music |
180W |
Output voltage |
100V / 70V / 50V / 35V / 25V internal
adjustable |
Loudspeaker impedance at 100V min. |
84 Ohm |
Distortion factor at 1KHz & 80% load |
< 0,1% |
Frequency response 100V / 70V /
50V -3dB |
50Hz .. 20 KHz |
Input sensitivity of final stage |
600mV |
Signal-to-noise-ratio |
> 95dB |
Power consumption at 230V AC |
250VA |
Safety |
protected against short-circuit, no-load
running and overheating |
Ventilation |
natural convection |
Size (WxHxD) |
446mm x 133mm x 270mm |
Weight |
appr. 10,5Kg |
Pre-stages : All inputs for microphone or high-level sources |
Microphone input sensitivity |
0,7mV .. 10mV adjustable |
Linear input sensitivity |
150mV .. 10V adjustable |
Gong / alarm input sensitivity |
300mV |
Tone control 100Hz / 12KHz |
+ / - 12dB |
Cross-talk at 1KHz |
< -65dB |
Priority control |
programmable |
Options : |
Transformer balanced inputs |
1 : 1 |
Inputs for external preamplifier PA-4-C |
PA-4-C |
Inputs for electret microphones |
electret |
19" adapter |
US 016 |
48V DC emergency power supply |
NSS - 48 |
Remote control |
"Remote" |
Extension modules |
SM-5-A / SM-13-E / DVR-400 / CM-14-E /
CM-15-E |
|